Blogarchiv
Raumfahrt - ISS-ALLtag: Northrop Grumman supply carrier delivers to International Space Station

22.02.2021

ng15capture

Northrop Grumman’s Cygnus supply ship completes its 15th cargo delivery to the International Space Station. Credit: NASA TV

A Northrop Grumman Cygnus supply ship arrived at the International Space Station on Monday with more than 8,000 pounds of cargo, including new astronaut sleeping quarters, parts for the station’s toilet, and numerous biomedical and technology experiments.

The space station’s Canadian-built robotic arm, under the control of Japanese astronaut Soichi Noguchi, captured the Cygnus spacecraft at 4:38 a.m. EST (0938 GMT) Monday as the supply ship held position less than 40 feet, or about 10 meters, below the orbiting research outpost.

The successful capture of the cargo freighter capped a nearly two-day flight from a launch pad on the Eastern Shore of Virginia, where the Cygnus spacecraft took off Saturday on top of an Antares rocket. The Cygnus completed a series of orbit adjustment burns over the weekend to set up for arrival at the space station Monday.

The Cygnus spacecraft was named the S.S. Katherine Johnson in honor of the NASA mathematician portrayed the film “Hidden Figures.”

“Congratulations to Northrop Grumman, to ESA, to JAXA, (and) to NASA for the successful arrival and capture of the S.S. Katherine Johnson,” said NASA astronaut Mike Hopkins from the International Space Station. “You guys have kept the lifeline to station alive despite some very difficult challenges on the ground, and just like Katherine Johnson helped enable human spaceflight during her time at NASA, her namesake is continuing that today. Well done everyone.”

Teams in Houston suffering from a winter storm that crippled power and water infrastructure across Texas delivered to the Virginia launch site the final time-sensitive cargo assigned to the Cygnus cargo mission last week.

Ground controllers planned to take command of the robot arm to maneuver the Cygnus spacecraft into position on a berthing port on the space station’s Unity module later Monday morning. Astronauts are expected to open hatches and enter the spacecraft later the same day to start unpacking more than four tons of gear inside the ship’s Italian-built pressurized cabin.

The Cygnus will remain at the space station for up to three months before departing to deploy several small CubeSats in orbit.

This Cygnus mission is designated NG-15. It’s the 15th of at least 19 cargo missions under Northrop Grumman’s commercial resupply contracts with NASA.

Northrop Grumman names its Cygnus supply ships after pioneers in spaceflight. The Cygnus flying on the NG-15 mission is named for Katherine Johnson, a mathematician whose trajectory calculations were critical to the success of NASA’s earliest space missions.

“It’s our tradition to name each Cygnus after an individual who’s played a pivotal role in human spaceflight, and Mrs. Johnson was selected for her hand-written calculations that helped launch the first Americans into space, as well as her accomplishments in breaking glass ceiling after glass ceiling as a Black woman,” said Frank DeMauro, vice president and general manager for tactical space at Northrop Grumman.

The NG-15 mission’s cargo load adds up to 8,399 pounds, or 3,810 kilograms, including packaging and unpressurized equipment to assist in the deployment of several CubeSats at the end of the flight. That’s more than any previous commercial cargo mission to the space station.

NASA has contracts with Northrop Grumman, SpaceX, and Sierra Nevada Corp. for resupply flights to the station. SpaceX has launched 21 operational Dragon cargo missions to date, and the record cargo payload for a Dragon capsule is 6,913 pounds, or 3,136 kilograms, on a mission launched April 2016.

While SpaceX’s Dragon brings cargo back to Earth, the Cygnus is a single-use spacecraft, and it carries away trash from the space station at the end of its mission before burning up in the atmosphere.

Sierra Nevada’s Dream Chaser spaceplane has not flown in space yet. Its first cargo mission to the space station is scheduled for 2022.

Here is a breakdown of the cargo on the NG-15 mission:

  • Vehicle Hardware: 3,115 pounds (1,413 kilograms)
  • Science Investigations: 2,484 pounds (1,127 kilograms)
  • Crew Supplies: 2,054 pounds (932 kilograms)
  • Unpressurized Cargo: 176 pounds (67 kilograms)
  • Spacewalk Equipment: 52 pounds (24 kilograms)
  • Russian Hardware: 52 pounds (24 kilograms)
  • Computer Resources: 2 pounds (1 kilogram)

The Cygnus delivered a brine processor assembly for the space station’s water recycling system, which converts urine into fresh drinking water. NASA says the new brine processor will demonstrate an ability to recover more water from urine brine than feasible with current space station equipment, helping close the gap to meet requirements for long-duration human exploration missions to the moon and Mars.

The brine processor works by using special membranes to separate contaminants from the brine and allow water vapor to pass into the cabin atmosphere, where a condensing heat exchanger captures and delivers it to the station system that generates fresh water.

“Long-duration crewed exploration missions require about 98% water recovery, and there is currently no state-of- the-art technology in brine processing that can help achieve this goal,” NASA officials wrote in a fact sheet. “This brine processor system plans to close this gap for the urine waste stream of the space station.”

The Cygnus mission is also carrying a new sleeping quarters for the space station’s seven-person crew. There are currently five crew members on the space station’s U.S. segment, with four astronauts who flew to the outpost on SpaceX’s Crew Dragon capsule in November, and astronaut Kate Rubins, who arrived in October on a Russian Soyuz spacecraft.

But the U.S. segment only has four sleep stations. Astronaut Mike Hopkins, commander of the Crew Dragon mission, has slept inside the SpaceX capsule docked to the space station.

Other hardware inside the Cygnus supply ship includes spare parts and support equipment for the space station’s toilets, and tanks of air to recharge the breathable atmosphere inside the space lab.

One of the research experiments on the NG-15 mission will investigate how microgravity affects the manufacturing of protein-based artificial retinas. Led by a Connecticut-based startup company named LambdaVision, the experiment is a follow-up to an investigation flown to the space station in 2018 that produced “very encouraging” results, according to Nicole Wagner, president and CEO of LambdaVision.

The company uses a “layer-by-layer” process to manufacture artificial retinas, which could be implanted in patients suffering from retinal degenerative diseases.

“This is the second of what we expect to be many, many flights (to the space station),” said Jordan Greco, chief scientific officer at LambdaVision. “This particular layering trial allows allow us to continue to gather critical information on the design of the system and to continue to probe the influence of microgravity on this layering process.”

“The work that we’re sending on NG-15 is we’re sending the protein materials, and we’re actually going to manufacture the artificial retina on the ISS. So we’re doing this layer by layer process on-board the International Space Station, and then those films will then be returned back to Earth for analysis,” Wagner said.

With funding support from NASA, LambdaVision is looking at extending the layer-by-layer manufacturing process to other applications besides artificial retinas, Wagner said.

The retina implants being developed by LambdaVision can restore “high-resolution vision” to patients by replacing the function of light-sensing rods and cones inside the eye, according to Wagner. The artificial retinas consist of a light-activated protein.

“We are just thrilled to have a chance to establish a foundation for producing products in low Earth orbit with true clinical benefits to patients, and in our casem for patients that are blinded by this devastating retinal degenerative disease,” Greco said.

Researchers move the CubeLab containing a new LambdaVision study, which evaluates a manufacturing system using a light-activated protein that replaces the function of damaged cells in the eye in an artificial retina.
Credits: Lambda Vision

Another experiment on the NG-15 mission will measure muscle strength in multiple generations of worms, including animals reared in space. Humans lose strength during long-duration space missions, but scientists want to better understand the biological changes caused by microgravity.

“To understand the biology, our project is focused on taking these … worms and looking at how the strength of these worms is changing,” said Siva Vanapalli, a professor of chemical engineering at Texas Tech University, and principal investigator of the experiment.

The experiment launched with 1,000 worm larvae that will grow during the mission. The worms will produce offspring several times in space, according to Vanapalli.

A new device, called NemaFlex, will measure the worms’ muscle forces continuously. “If we do observe that our device is able to record these changes in strength, that opens up tremendous opportunities in conducting experiments on different drugs and figuring out how to maintain and improve the health of astronauts,” Vanapalli said.

The Cygnus ferried to the space station a high-performance commercial off-the-shelf computer from Hewlett Packard Enterprise. Engineers will test the computer’s ability to process scientific data in space, potentially enabling researchers to produce quicker results from their experiments, according to NASA.

The cargo mission also carries a radiation detector that will fly on NASA’s Orion spacecraft. A successful test of the radiation monitor on the space station would validate the unit to fly on the first crewed Orion mission, Artemis 2, to the moon in 2023, NASA said.

Several small nanosatellites are stowed aboard the Cygnus cargo craft for release into orbit in the coming months.

The Gunsmoke-J technology demonstration satellite is a 3U CubeSat for the U.S. Army Space and Missile Defense Command, which aims to prove the usefulness of an Earth-imaging payload for tactical use by military combat troops.

“This science and technology effort will provide new and advanced capabilities to the tactical warfighters in a small satellite that is about the size of a loaf of bread,” the Army said in a press release last year. “The effort will also help inform future acquisition decisions.”

The Gunsmoke-J satellite and two other small satellites for unspecified U.S. government customers launched inside the Cygnus spacecraft’s pressurized module. Before the craft departs the International Space Station later this year, astronauts will place the satellites on rail deployer on the Cygnus hatch for separation after the freighter leaves the complex.

Spaceflight, the Seattle-based rideshare launch broker, arranged launch services for the Gunsmoke-J and the two other U.S. government satellites.

Several other CubeSats are also aboard the Cygnus cargo freighter. One is named IT-SPINS, and it will collect images of the ionosphere over the night side of the Earth during a six-month research mission. The IT-SPINS CubeSat, about the size of a toaster oven, was developed at Montana State University.

A CubeSat named DhabiSat was developed by students at Khalifa University in Abu Dhabi. Students developed the CubeSat with help from Yahsat, a communications satellite company in Abu Dhabi, and Northrop Grumman.

Paraguay’s first satellite, a CubeSat known as GuaraniSat 1, also launched Saturday. Paraguay’s space agency says the CubeSat was developed in partnership with engineers in Japan and universities and research centers in Paraguay.

Quelle: SN

1141 Views
Raumfahrt+Astronomie-Blog von CENAP 0