Blogarchiv
Raumfahrt - Start von Antares mit NG-16 Cygnus Cargo

9.07.2021

NASA Invites Media to Northrop Grumman’s August Launch from Virginia

ng-16-patch

ng15-launchpb-2-002

Media accreditation is open for the launch from Virginia of Northrop Grumman’s 16th commercial resupply services mission to deliver NASA science investigations, supplies, and equipment to the International Space Station aboard its Cygnus spacecraft.

 

Northrop Grumman is targeting liftoff of its Antares rocket for no earlier than 5:55 p.m. EDT Tuesday, Aug. 10, from Pad-0A of the Mid-Atlantic Regional Spaceport at NASA’s Wallops Flight Facility on Wallops Island.

 

Both U.S. and international media, as described in NASA’s newly released agencywide media accreditation policy, must apply by 4 p.m. Tuesday, July 27. All accreditation requests must be sent to Keith Koehler at: keith.a.koehler@nasa.gov. Due to ongoing coronavirus (COVID-19) restrictions, registration for international media for this launch will be limited to international media already based in the United States.

 

Each resupply mission to the station delivers scientific investigations in the areas of biology and biotechnology, Earth and space science, physical sciences, and technology development and demonstrations.

 

Highlights of space station research facilitated by this mission are:

  • The Redwire Regolith Print study, which demonstrates 3D printing in space using a material simulating rock and soil found on the surfaces of planetary bodies, such as the Moon.
  • Blob, an ESA (European Space Agency) investigation, which will allow students to see how slime molds’ behavior is affected by microgravity.
  • Capsules, which will deploy when Cygnus re-enters the atmosphere and transmit data to test an affordable thermal protection system, also known as a heat shield.
  • A new spacecraft carbon dioxide removal technology that could help future explorers on the Moon and Mars breathe more easily.

 

Cargo resupply from U.S. companies ensures a national capability to deliver critical science research to the space station, significantly increasing NASA's ability to conduct new investigations at this laboratory in space. Cygnus also will carry a new modification kit, or mounting bracket, that astronauts will attach to the left (port) side of the station’s backbone truss in a location designated P4 during a spacewalk planned for late August. The mounting bracket will enable the installation of one of the next pair of new solar array to be at a later date.

Quelle: NASA

----

Update: 6.08.2021

.

NASA TV Coverage Set for Next International Space Station Cargo Launch

ng16-mate-1-copy

Northrop Grumman’s Antares rocket is mated with the Cygnus spacecraft in preparation for it’s Aug. 10 launch from NASA’s Wallops Flight Facility in Virginia.
Credits: NASA/Patrick Black

NASA and Northrop Grumman are targeting 5:56 p.m. EDT, Tuesday, Aug. 10, for the company’s 16th commercial resupply services mission to the International Space Station. Live coverage of the launch from NASA’s Wallops Flight Facility in Wallops Island, Virginia, will air on NASA Television, the NASA app, and the agency’s website beginning at 5:30 p.m. NASA also will hold a prelaunch news briefing Monday, Aug. 9.

 

Loaded with more than 8,200 pounds of research, crew supplies and hardware, Northrop Grumman’s Cygnus cargo spacecraft will launch on the company’s Antares rocket from Virginia Space’s Mid-Atlantic Regional Spaceport.

 

The Cygnus spacecraft, dubbed the SS Ellison Onizuka in honor of the first Asian American astronaut, will arrive at the space station Thursday, Aug. 12. At about 6:10 a.m., Expedition 65 NASA astronaut Megan McArthur will capture Cygnus with the station’s robotic arm, and ESA (European Space Agency) astronaut Thomas Pesquet will support her. After Cygnus capture, mission control in Houston will send ground commands for the station’s arm to rotate and install the cargo spacecraft on the Earth-facing port of the station’s Unity module.

 

Cargo resupply from U.S. companies ensures a national capability to deliver critical science research to the space station, significantly increasing NASA's ability to conduct new investigations at this laboratory in space. Each resupply mission to the station delivers scientific investigations in the areas of biology and biotechnology, Earth and space science, physical sciences, and technology development and demonstrations. This Cygnus carries experiments that demonstrate 3D printing with dust, use engineered tissue to study muscle loss, and analyze growth of slime mold.

 

Cygnus also will carry a new mounting bracket that astronauts will attach to the port side of the station’s backbone truss during a spacewalk planned for late August. The mounting bracket will enable the installation of one of the next pair of new solar arrays at a later date.

 

Complete coverage of launch activities is as follows:

 

Monday, August 9

 

1 p.m. – Prelaunch News Conference

  • Joel Montalbano, manager, International Space Station Program
  • Kirt Costello, chief scientist, International Space Station Program
  • Frank DeMauro, vice president and general manager, Tactical Space Systems, Northrop Grumman
  • Kurt Eberly, director, Space Launch Programs, Launch and Missile Defense Systems, Northrop Grumman
  • Brittany McKinley, Wallops Range Antares Project Manager

 

Media can submit questions during the prelaunch press conference by emailing Grey Hautaluoma at grey.hautaluoma-1@nasa.gov.

 

Tuesday, August 10

 

5:30 p.m. – Launch coverage begins for lift off at 5:56 p.m.

 

Thursday, August 12

 

4:45 a.m. – Rendezvous coverage begins

 

6:10 a.m. – Capture of Cygnus with NASA astronaut Megan McArthur operating the space station’s robotic arm

 

8 a.m. – Cygnus installation operations coverage

 

The Cygnus spacecraft is scheduled to remain at the space station until November when it will depart the station, disposing of several tons of trash during a fiery reentry into Earth’s atmosphere.

Quelle: NASA

----

Update: 11.08.2021

. 

Antares rocket ready for launch on space station resupply mission

A mobile clean room, seen here Monday, attached to the nose cone of Northrop Grumman’s Antares rocket allowed ground teams to load time-sensitive cargo into a Cygnus supply ship before its launch to the International Space Station. Credit: Alex Polimeni / Spaceflight Now

Northrop Grumman packed last-minute cargo into a commercial Cygnus supply ship Monday on a launch pad in Virginia, putting the finishing touches on a spacecraft set for liftoff Tuesday atop an Antares rocket on a mission to the International Space Station.

The automated cargo freighter, named the “S.S. Ellison Onizuka” after one of the astronauts who died in the space shuttle Challenger accident, is loaded with 8,210 pounds (3,723 kilograms) of supplies and experiments.

The Cygnus supply ship is set to blast off from pad 0A at the Mid-Atlantic Regional Spaceport on Wallops Island, Virginia, at 5:56:05 p.m. EDT (2156:05 GMT) Tuesday, the opening of a five-minute launch window to send the cargo mission in pursuit of the space station.

A 139-foot-tall (42.5-meter) Antares rocket will propel the Cygnus spacecraft into orbit. The two-stage rocket rolled out of Northrop Grumman’s Horizontal Integration Facility on Friday for the one-mile trip to pad 0A.

Ground crews raised the rocket vertical on the launch pad for checkouts over the weekend, then lowered the Antares horizontal again to begin the process of loading time-sensitive cargo into the Cygnus spacecraft.

Once a mobile clean room moved into place, technicians removed the “pop top” nose cone from the Antares rocket and opened the Cygnus hatch. The final cargo items to be loaded into the Cygnus spacecraft included biological experiments and fresh food for the space station’s seven-person crew.

By early Tuesday, the late cargo load should be complete, allowing teams to close the Cygnus hatch and re-install the upper part of the rocket’s payload fairing. The rocket is scheduled to be lifted vertical again around 5 a.m. EDT (0900 GMT) Tuesday.

The five-hour countdown will begin shortly before 1 p.m. EDT (1700 GMT), beginning with power-up of the Antares flight computer and testing of the rocket’s telemetry transmitters and navigation system. Loading of kerosene and liquid oxygen propellants into the Antares first stage will begin about an hour-and-a-half before liftoff.

There’s an 80 percent chance of good weather Tuesday for launch of the Antares rocket from Virginia Eastern Shore.

The Northrop Grumman resupply mission, named NG-16, will be the 16th cargo delivery to the space station by a Cygnus supply ship since 2013. It will be the 15th launch of an Antares rocket, which has suffered one failure on its prior 14 missions.

The first stage’s two Russian-made RD-181 main engines will roar to life 3.7 seconds before liftoff. After the engines throttle up to full power, hold-down bolts will release to allow the Antares to begin its climb into space.

The RD-181 engines will produce about 864,000 pounds of thrust to steer the rocket on a course southeast from Wallops.

At about T+plus 3 minutes, 24 seconds, the Antares will shed its liquid-fueled first stage, followed soon after by separation of the rocket’s payload fairing and interstage adapter. A solid-fueled Castor 30XL upper stage will ignite at about T+plus 4 minutes, 7 seconds, for nearly three minutes to inject the Cygnus supply ship into a preliminary orbit in pursuit of the space station. The Cygnus cargo craft is scheduled to deploy from the Antares second stage at about T+plus 8 minutes, 52 seconds.

The Cygnus will unfurl its two fan-shaped solar panels within a couple of hours after liftoff, allowing the spacecraft to start charging batteries for the day-and-a-half trip to the space station. Astronaut Megan McArthur aboard the research complex will use the Canadian-built robotic arm to capture the commercial resupply vessel around 6:10 a.m. EDT (1010 GMT) Thursday, assuming an on-time launch Tuesday.

Northrop Grumman’s Antares rocket on pad 0A at the Mid-Atlantic Regional Spaceport. Credit: NASA

NASA has multibillion-dollar contracts with Northrop Grumman, SpaceX, and Sierra Nevada Corp. to ferry cargo to and from the space station. Northrop Grumman’s two resupply contracts covers 19 operational cargo missions through 2023.

The cargo launching aboard the Cygnus spacecraft includes a technology demonstration to look at how future space explorers could 3D-print materials out of lunar soil.

The 3D printing demonstration, developed by Redwire, will use a “lunar regolith simulant” with physical properties and chemical composition similar to that of the moon’s soil, said Howie Schulman, the project lead for the Redwire Regolith Print mission.

The simulant is a fine gray powder, which will be combined with a thermoplastic binder to create the feedstock for the 3D printing experiment.

The experiment, developed in partnership with NASA’s Marshall Space Flight Center, will use Redwire’s commercially-operated Additive Manufacturing Facility on the space station. Redwire says it’s the first time that material designed to mimic lunar soil has been used for the 3D printing in space.

Hardware launching on the NG-16 mission for the 3D printing demonstration includes three custom-designed printing heads and three print bed surfaces, according to Redwire.

The material samples printed during the tech demo will be returned to Earth for analysis.

NASA and commercial companies are interested in 3D printing technology that could help manufacture components and infrastructure on the surface of the moon. Future lunar explorers could manufacture their own hardware instead of bringing materials from Earth, or relying on costly cargo shipments.

The NG-16 mission will also deliver spare parts for the space station’s toilet, a stowage rack for the lab’s airlock, and cooling fans for the station’s life support system.

The Cygnus spacecraft is also set to deliver a “mod kit” to configure the space station’s solar power truss for the arrival of the next pair of new roll-out solar arrays in late 2022. The first two new solar arrays were delivered to the station in June by a SpaceX Dragon cargo capsule, beginning an upgrade that will expand the lab’s power generation capability for another decade of operations.

Astronauts will install the “mod kit” on the station’s huge power truss ahead of the arrival of the next two roll-out solar arrays.

Other payloads set for launch Tuesday include a biomedical research investigation looking at muscle loss in microgravity, and an experiment to test a more efficient thermal control system that could be used to dissipate heat on future spacecraft.

The Cygnus spacecraft is scheduled to remain berthed at the space station for about three months.

After departing the research complex in November, the Cygnus cargo craft will head for a destructive re-entry over the South Pacific Ocean, disposing of several tons of trash packed inside its pressurized compartment by space station astronauts.

One of the final experiments of the mission will be a test of heat shield technology using three small capsules stowed inside the Cygnus spacecraft.

When the Cygnus breaks apart during re-entry, the capsules will plunge deeper into the atmosphere protected by heat shields made of different types of materials.

Led by engineers at the University of Kentucky, the experiment will collect data from sensors embedded in each capsule’s heat shield. The measurements will be transmitted back to the science team via the Iridium satellite network.

The developers of the re-entry experiment say the data will help validate computer models used in spacecraft design. 

Quelle: SN 
+++
Start von Antares mit NG-16 Cygnus Cargo
cygnus-ng-16-launch-a
cygnus-ng-16-launch-aa
cygnus-ng-16-launch-ab
cygnus-ng-16-launch-ac
cygnus-ng-16-launch-ad
cygnus-ng-16-launch-ae
cygnus-ng-16-launch-af
cygnus-ng-16-launch-ag
cygnus-ng-16-launch-ah
cygnus-ng-16-launch-ai
cygnus-ng-16-launch-aj
cygnus-ng-16-launch-ak
cygnus-ng-16-launch-al
Quelle: NASA
 
 

 

1642 Views
Raumfahrt+Astronomie-Blog von CENAP 0