Blogarchiv
Luftfahrt - NASA Takes Delivery of First All-Electric Experimental Aircraft X-57 Maxwell

8.10.2019

afrc2019-0242-59

NASA’s X-57 Maxwell, the agency’s first all-electric X-plane and first crewed X-planed in two decades, is delivered to NASA’s Armstrong Flight Research Center in Edwards, California, in its Mod II configuration. The first of three primary modifications for the project, Mod II involves testing of the aircraft’s cruise electric propulsion system. Delivery to NASA from prime contractor Empirical Systems Aerospace of San Luis Obispo, California, marks a major milestone for the project, at which point the vehicle is reintegrated for ground tests, to be followed by taxi tests, and eventually, flight tests. X-57’s goal is to further advance the design and airworthiness process for distributed electric propulsion technology for general aviation aircraft, which can provide multiple benefits to efficiency, emissions, and noise.
Credits: NASA

The first all-electric configuration of NASA’s X-57 Maxwell now is at the agency’s Armstrong Flight Research Center in Edwards, California.

 

The X-57, NASA’s first all-electric experimental aircraft, or X-plane – and the first crewed X-plane in two decades – was delivered by Empirical Systems Aerospace (ESAero) of San Luis Obispo, California on Wednesday, Oct. 2, in the first of three configurations as an all-electric aircraft, known as Modification II, or Mod II.

The X-57’s Mod II vehicle features the replacement of traditional combustion engines on a baseline Tecnam P2006T aircraft, with electric cruise motors. The delivery is a major milestone for the project, allowing NASA engineers to begin putting the aircraft through ground tests, to be followed by taxi tests and eventually, flight tests.

 

"The X-57 Mod II aircraft delivery to NASA is a significant event, marking the beginning of a new phase in this exciting electric X-plane project,” said X-57 Project Manager Tom Rigney. “With the aircraft in our possession, the X-57 team will soon conduct extensive ground testing of the integrated electric propulsion system to ensure the aircraft is airworthy. We plan to rapidly share valuable lessons learned along the way as we progress toward flight testing, helping to inform the growing electric aircraft market.

 

While X-57’s Mod II vehicle begins systems validation testing on the ground, efforts in preparation for the project’s following phases, Mods III and IV, are already well underway, with the recent successful completion of loads testingon a new, high-aspect ratio wing at NASA Armstrong’s Flight Loads Laboratory. Following completion of tests, the wing, which will be featured on Mods III and IV configurations, will undergo fit checks on a fuselage at ESAero, ensuring timely transition from the project’s Mod II phase to Mod III.

 

“ESAero is thrilled to be delivering the MOD II X-57 Maxwell to NASA AFRC,” said ESAero President and CEO Andrew Gibson. “In this revolutionary time, the experience and lessons learned, from early requirements to current standards development, has the X-57 paving the way. This milestone, along with receiving the successfully load-tested MOD III wing back, will enable NASA, ESAero and the small business team to accelerate and lead electric air vehicle distributed propulsion development on the MOD III and MOD IV configurations with integration at our facilities in San Luis Obispo.”

 

A goal of the X-57 project is to help develop certification standards for emerging electric aircraft markets, including urban air mobility vehicles, which also rely on complex distributed electric propulsion systems. NASA will share the aircraft’s electric-propulsion-focused design and airworthiness process with regulators and industry, which will advance certification approaches for aircraft utilizing distributed electric propulsion.

 

The X-57 team is using a “design driver” as a technical challenge, to drive lessons learned and best practices. This design driver includes a 500% increase in high-speed cruise efficiency, zero in-flight carbon emissions, and flight that is much quieter for communities on the ground.

 

The X-57 project operates under the Integrated Aviation Systems Program’s Flight Demonstrations and Capabilities project, within NASA’s Aeronautics Research Mission Directorate.

+++

X-57 Battery System Survives Flight-Condition, Thermal Runaway Testing

 

Throughout the testing, NASA, EPS and ESAero monitored the battery’s overall capacity, including its ability to remain stable.
Throughout the testing, NASA, EPS and ESAero monitored the battery’s overall capacity, including its ability to remain stable throughout an X-57 flight profile. Thermal runaway and propagation testing was then conducted to confirm that the battery system’s design could keep the pilot and aircraft safe in the case of a thermal runaway event. Testing took place at an EPS co-joint testing facility with Utah State University, following a redesign of the battery system.
Credits: Electric Power Systems

NASA engineers have reached a major milestone with the successful testing of the battery system that will power NASA’s first all-electric X-plane when it takes flight in 2018.

 

The testing validated that the battery system has the necessary capacity to safely power NASA’s first manned X-plane in two decades, the X-57 Maxwell, for an entire flight profile. The test also confirmed the battery design’s ability to isolate potential overheating issues to single battery cells, preventing unsafe conditions from spreading to the rest of the battery system.

 

The X-57 is being developed to demonstrate a significant increase in efficiency at high speed cruise compared to aircraft propelled by traditional systems, resulting in lower operating costs, as well as lower carbon emissions.

 

The successful completion of the battery tests represents a significant step forward in the X-57 project, says X-57 Project Manager Tom Rigney.

 

“This was an extremely critical milestone for the overall project,” said Rigney. “Without a safe battery system, we wouldn’t be able to execute our objectives.  This test truly ensures a safe environment for the pilot and the test program.”

 

Engineers from NASA’s Armstrong Flight Research Center in California and Glenn Research Center in Ohio joined the X-57 project’s commercial partners for the testing, including prime contractor Empirical Systems Aerospace, or ESAero, and Electric Power Systems, or EPS, both of California.

 

The first test performed was a battery functional test, which examined the battery’s capacity, demonstrating the ability of the battery to power the aircraft for the duration of a flight without overheating to unsafe levels. X-57 will be powered using lithium-ion batteries that will warm up as they discharge during flight. Too much warming could result in overheating, potentially exposing both the aircraft and the pilot to dangerous conditions during flight. Engineers, therefore, had to demonstrate that the battery system would stay within acceptable, safe limits while powering a flight.

 

The battery functional test was conducted by using a power supply that was able to produce specific amounts of current, each representing different conditions during various stages of a flight, including taxiing, climb, cruise-climb, go around and landing. Varying amounts of current were exposed to the battery on a specific timeline, using a computer-controlled system, says NASA Glenn’s Dionne Hernandez-Lugo, battery development lead for X-57.

 

“We exposed the battery to the conditions of an X-57 flight, based on current expected flight profiles, to make sure the capacity and thermal conditions stayed within safe limits,” explained Hernandez-Lugo. “We were able to see how the battery behaves throughout the flight, as well as the overall capacity. The battery passed.”

 

The second test, known as a thermal runaway and propagation test, was critical in validating the redesign of the battery system, which took place following the results of similar testing in December 2016. One concern was the potential of lithium-ion battery cells to experience a “thermal runaway.” This happens when a battery cell experiences a rapid increase in temperature that could lead to a fire, spreading to other battery cells and causing a larger battery system failure.

 

NASA Glenn and NASA’s Johnson Space Center in Houston teamed with EPS and ESAero, to develop a design that could essentially isolate such an incident to the affected battery cell and prevent the anomaly from spreading to other cells.

 

“What we did on this redesign was revise our containment strategy. Rather than looking at pack level containment, we focused on containment at the individual cell level. We also revised our ventilation strategy to enable a much more rapid release of heat than the previous design,” EPS Chief Executive Officer Millecam said.

 

The containment of a thermal runaway was a critical factor in the validation of the new battery design, explained Rigney.

 

“In the event of a complete thermal runaway, a battery cell catches fire and could spread to other battery cells, causing the hazard of a full battery fire,” said Rigney. “This testing investigated the new design’s ability to mitigate that hazard, and to ensure that any heat dissipation, in the event of a single cell runaway, would not spread to other cells.”

 

In order to test this, engineers used a trigger cell, which was intentionally set to malfunction and experience a thermal runaway by exposing it to an excessively high current. The temperatures of neighboring cells were then monitored to see if they increased to a point that would have indicated that the thermal runaway had spread.

 

X-57, pictured here in its final Mod IV configuration, will be powered by a battery system that consists of 16 battery modules.
X-57, pictured here in its final Mod IV configuration, will be powered by a battery system that consists of 16 battery modules. This system will comprise 800 lbs of the aircraft’s total weight. NASA Aeronautics researchers will use the Maxwell to demonstrate that electric propulsion can make planes quieter, more efficient and more environmentally friendly.
Credits: NASA Langley/Advanced Concepts Lab, AMA, Inc.

 “The results of the test were that the runaway did not spread, and did not cause a cascading failure,” Hernandez-Lugo stated. “This really gave us the peace of mind that, even if an event does occur, we have a design in place that’s going to allow us to continue to operate, and land the plane safely without having any fire. This helped us understand that this battery is safe enough to use in flight.”

 

Now that the redesign of the battery system has been completed, the batteries themselves can be fabricated, along with the necessary flight hardware, prior to being integrated into the aircraft.

 

X-57 is expected to start flying in March 2018 in Modification II, or “Mod II,” with two fully electric inboard motors instead of the traditional combustion engines. After Mod II flights are complete in May 2018, the team will convert X-57 into its Mod III configuration, which features the replacement of the standard wing with a high-aspect ratio wing, and the relocation of the electric motors to the wingtips. The final configuration of X-57, Mod IV, will feature the addition of 12 smaller electric high-lift motors, to be used during takeoff and landing, in addition to the wingtip cruise motors.
Quelle: NASA
----
Update: 15.04.2020
.

NASA Successfully Tests Telemetry Signal on Agency’s First All-Electric X-plane

afrc2020-0038-11

Recent ground testing on NASA’s first all-electric X-plane, the X-57 Maxwell, successfully demonstrated the aircraft’s ability to transmit its telemetry signal, allowing the team the capability to track mission-critical data during flight.

This data will be received on the ground during X-57’s flight tests, where it will be monitored in real time by the project team during flight operations, and recorded for post-flight analysis to measure X-57’s success in meeting its objectives, as NASA seeks to help set certification standards for future electric aircraft.

Completion of this round of tests, which took place at NASA’s Armstrong Flight Research Center in Edwards, California, marked continued progress on X-57’s functional ground testing phase – a necessary step toward taxi and flight tests.

Banner Image: Telemetry testing begins on the X-57 Maxwell, NASA’s first all-electric X-plane, as the operations crew at NASA’s Armstrong Flight Research Center records the results. Telemetry testing is a critical phase in X-57’s functional test series. In addition to confirming the ability of the X-57 aircraft to transmit speed, altitude, direction, and location to teams on the ground, telemetry testing also confirms the ability to transmit mission-critical-data, such as voltage, power consumption, and structural integrity. X-57’s goal is to help set certification standards for emerging electric aircraft markets.  NASA Photo / Ken Ulbrich

“We are doing telemetry testing to confirm that we will be able to monitor data on the ground during future flights,” said X-57 Deputy Operations Engineering Lead Kirsten Boogaard. “It is important to make sure that everything works on the ground before we begin flight testing, first to ensure the safety of the flight, and also to ensure that our mission data will be received by the control room during flights.”

NASA’s first all-electric X-plane, the X-57 Maxwell, in its final configuration.
This artist’s concept image shows NASA’s first all-electric X-plane, the X-57 Maxwell, in its final configuration, flying in cruise mode over NASA’s Armstrong Flight Research Center in Edwards, California. In Mod IV test flights, X-57’s high-lift motors will deactivate during cruise mode, and their propeller blades will fold in to the nacelles to reduce drag. The motors will reactivate and use centrifugal force to spin the blades back out to provide necessary lift for landing. X-57’s goal is to help set certification standards for emerging electric aircraft markets.
Credits: NASA Langley/Advanced Concepts Lab, AMA, Inc

This mission data will help NASA researchers validate whether X-57, which is a converted Tecnam P2006T aircraft, successfully meets its “design drivers” – technical challenges to drive lessons learned and best practices. These design drivers include demonstration of an increase in energy efficiency, zero in-flight carbon emissions, and flight that is much quieter for communities on the ground. 

The success of X-57’s ability to meet these objectives will be measured by comparing data from the electric aircraft’s future flight tests to the performance of a baseline, combustion-driven P2006T aircraft.

“This is important research data to monitor during flight. We need to be able to track the X-57’s position, speed, and altitude to see if we’re reaching our flight conditions,” said X-57 Flight Systems Lead Yohan Lin. “At the same time, the system needs to transmit sensor information such as cruise motor traction bus voltage, current, and propeller speed so that the electric aircraft’s performance can be assessed.”

Telemetry testing was conducted by establishing a Radio Frequency (RF) link between the aircraft and the downlink equipment of a NASA telemetry van. The X-57’s two antennas, a top and a bottom antenna, were tested together first in the flight configuration, and then each antenna individually.

The transmitter was operated by an avionics technician in the X-57 cockpit, based on instructions from the test conductor. The instrumentation engineer and telemetry technician monitored the downlink signal in the van, and was able to confirm that the data messages were being received as expected.

Among the data monitored throughout the tests, the X-57 team specifically looked at  RF power. This measurement allowed engineers to observe the signal strength of the overall transmission. The team also looked at the bandwidth and center frequency of the signal pattern, to determine if the system is operating within the bounds of the allocated frequency range.

NASA engineers put the X-57 through its initial telemetry tests at AFRC.
NASA engineers put the X-57 Maxwell, NASA’s first all-electric X-plane, through its initial telemetry tests at NASA’s Armstrong Flight Research Center in California, testing the aircraft’s ability to transmit data to teams on the ground. The data is packaged and transmitted down to ground assets, where it’s decoded into a format that can be presented to a flight control team to look at screens in real time for flight operations.
Credits: NASA Photo / Ken Ulbrich

The testing indicated no major anomalies in the X-plane’s ability to transmit data.

“This checkout verifies that we are operating at the right specifications,” said Lin. “The next step will be functional testing of the cruise motors at high voltage, and we’ll be monitoring certain critical parameters using this telemetry system.”

As X-57 Operations Engineering Lead Michael Quinton points out, this functional ground testing phase was indicative of things coming together over multiple areas for the X-plane, and was a big step in leading toward taxi and flight tests.

“One of the best parts of our recent testing was getting an opportunity for all of our discipline engineers and technicians to come together, and support a single, real-time event.”

Quelle: NASA

----

Update: 1.03.2021

.

NASA to Begin High-Voltage Ground Testing on All-Electric X-57

afrc2019-0277-176-0

NASA's all-electric X-57 Maxwell prepares for ground vibration testing, or GVT, at NASA's Armstrong Flight Research Center in California. Done in parallel with cruise motor controller testing, the GVT tested the vehicle at various vibration levels, helping engineers to examine and validate the integrity of the vehicle for flight conditions. A goal of X-57 is to help the Federal Aviation Administration set certification standards for emerging electric aircraft markets.
Credits: NASA Photo / Lauren Hughes

NASA is set to start high-voltage functional ground testing of the agency’s first all-electric X-plane, the X-57 Maxwell, which will perform flights to help develop certification standards for emerging electric aircraft. NASA is also supporting these new electric aircraft by developing quiet, efficient, reliable technology these vehicles will need in routine use.

 

The testing will take place at NASA’s Armstrong Flight Research Center in Edwards, California, marking a pivotal milestone for the project as NASA proceeds from the component design and prototype phase to operation of the vehicle as an integrated aircraft, taking a critical step closer toward taxi tests and first flight.

 

The X-57, currently in its first configuration as an electric aircraft, called Mod 2, will use a battery support system for this phase of testing, drawing power from a large, high-voltage power supply as development on the X-plane’s battery control system nears completion.

 

Testing is expected to start with low power, checking the startup and shutdown sequences and verifying that the new motor control software boots up and controls the motors as expected. This software and other major components were recently redesigned based on lessons learned from previous testing by the project’s prime contractor, Empirical Systems Aerospace, or ESAero, of San Luis Obispo, California.

 

These tests will include higher-power operation of the vehicle. The first pair of electric cruise motors to fly on the X-57, which were delivered by ESAero, will be powered up and activated, allowing engineers to ensure that the vehicle’s propellers spin as designed.

 

This will be followed by throttling up the motors to make sure they provide all the power intended, validating the vehicle’s instrumentation system, and verifying whether all the sensors installed across the aircraft are functional.

 

This high-voltage testing will feed directly into final verification and validation testing, a critical final step before taxi tests begin.

 

“Many of the team members operating this test will be the same ones who will be sitting in the control room for flight, and that’s why I’m excited,” said Sean Clarke, NASA’s X-57 principal investigator. “We’ve turned a corner from system design and lab tests, to turning it over to the NASA flight systems and operations engineers to actually operate the vehicle. What they’re learning in this test, they’ll take with them into the control room for first flight.”

Quelle: NASA

4017 Views
Raumfahrt+Astronomie-Blog von CENAP 0